HP rp5800 Maintenance And Service Manual page 20

Table 2-4 Computer Setup—Security (continued)
Slot Security
Network Boot
System IDs
10 Chapter 2 Computer Setup (F10) Utility
◦
USB Port 3
◦
USB Port 4
◦
USB Port 5
◦
USB Port 6
●
Accessory USB Ports
◦
USB Port 1
◦
USB Port 2
Allows you to disable any PCI or PCI Express slot. Default is enabled.
Enables/disables the computer's ability to boot from an operating system installed on a network
server. (Feature available on NIC models only; the network controller must be either a PCI
expansion card or embedded on the system board.) Default is enabled.
Allows you to set:
●
Asset tag (18-byte identifier), a property identification number assigned by the company to
the computer.
●
Ownership tag (80-byte identifier) displayed during POST.
●
Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can only be
updated if the current chassis serial number is invalid. (These ID numbers are normally set in
the factory and are used to uniquely identify the system.)
●
Keyboard locale setting for System ID entry.