Table of Contents
Advertisement
You can get more information on MMSI numbers at these resources:
The dealer where you purchased the radio
Recreational boaters can obtain an MMSI number from the Boat Owner's Association
of the U.S. (http://www.boatus.com/mmsi/ or call 800-536-1536) or Sea Tow Services
International (http://seatow. com/boating_safety/mmsi.asp)
Commercial boaters need a ship station license to get an MMSI number. For more
information, visit the Federal Communications Commission (FCC) website at http://
wireless.fcc.gov/marine/ fctsht14.html.
entering MMsi numbers
Individual or User MMSI Number
nOte: Be sure you have the correct user MMsi number before entering it in the radio. the
radio only allows you to enter the user MMsi once. if you need to re-enter the user MMsi
Follow the steps below to enter your individual or user MMSI number into the radio:
number, contact customer service (see back page for contact information).
Press and hold
Press and hold
1.
Display the normal menu and choose the Setup sub-menu.
2.
Select User MMSI. (If an MMSI number was already entered, the screen displays it with
the message Cannot change over 1 time. Contact customer service. (See back page for
contact information.).
3.
Use
increases the number and
CHANNEL UP
4.
When the first digit is correct, press
the remaining eight digits of the MMSI number in the same way. If you make a mistake
while entering a number, press
moved to the left digit.
5.
When the ninth digit is correct, press
number and asks you to confirm. To save this MMSI number, select Yes; the radio asks
for confirmation again. To cancel this MMSI number, select No; the radio returns to the
Setup menu.
nOte: Be sure you entered the number correctly before confirming the entry. You can only
6.
Before saving the number, the radio displays a final confirmation screen and reminds
save the user MMsi once.
you that this is a permanent setting. Press
the User MMSI Entry screen
English
Use the up and down arrows
Use the up and down arrows
Setup
Setup
User MMSI
User MMSI
and
CHANNEL DOWN
CHANNEL DOWN
CLR-SCAN
to adjust each of the nine
to adjust each of the nine
digits in turn.
digits in turn.
[New]
[New]
to enter the first of the nine digits;
decreases it.
. The cursor moves to the next digit. Enter
ENT-1W/25W
to erase the wrong number and the cursor is
. The radio displays the new MMSI
ENT-1W/25W
to accept this MMSI. Press
ENT
16
16
User MMSI
User MMSI
0________
0________
Back[CLR] Forward[ENT]
Back[CLR] Forward[ENT]
CHANNEL UP
to return to
CLR
Hide quick links:
Advertisement
Table of Contents
