Uniden UM415BK Owner's Manual page 12

Message
GPS Data OK
Check GPS
Input Position
Battery Low
Battery High
To transmit, press and hold
Using the radio in normal mode
you are finished talking.

For the best sound quality, hold the microphone about two inches from your mouth while
you're talking.

Press
and hold either button to scroll quickly up the channels.

CHANNEL UP
Press
Press and hold either button to scroll quickly down the channels.

CHANNEL DOWN
To change the transmit power, press and hold the
transmit power switches between 1 watt and 25 watts each time you press and hold

1W/25W.
If you activate Weather Alert Watch while operating in normal mode, the radio checks
Normal mode with Weather Alert Watch
the most recently-used weather channel every seven seconds. If it detects a weather alert
for your area, it will change the channel to the last-used weather channel. The radio will
not check the weather channel while you are actively transmitting; it waits until your
transmission is finished and then checks the weather channel.
1 English
Transmit power Transmit power
(1 W or 25 W) (1 W or 25 W)
25 Watts USA 25 Watts USA
Memory Alert Memory Alert
Current channel Current channel
is stored in is stored in
GPS Data OK GPS Data OK
memory memory
Marine Operator Marine Operator
Status messages Status messages
(see the status (see the status
message table) message table)
Meaning
The radio is receiving valid GPS data.
The radio is not receiving valid GPS data: check the GPS status
screen andthe GPS connection.
The radio has been unable to receive valid GPS data for at least four
hours; it can no longer track your position. You need to manually input
your position (see Setting the GPS position manually on page 20).
The battery voltage output is too low (below 10.5 VDC).
The battery voltage output is too high (above 16.0 VDC).
PUSH TO TALK
on the radio or the microphone to move up one channel at a time. Press
on the radio or the microphone to move down one channel at a time.
Weather Alert Weather Alert
Channel mode Channel mode
Watch on Watch on
(USA, CANadian, (USA, CANadian,
or INTernational) or INTernational)
25 25
on the microphone. Release the button when
ENT-1W/25W
Status Status
Icons Icons
Current Current
channel channel
number number
Current channel Current channel
name (if the name name (if the name
is too long, the is too long, the
name line scrolls) name line scrolls)
for two seconds. The
ENT-