Texas Instruments TINSPIRE Manual Book page 25

Teacher software guidebook

Hide thumbs Also See for TINSPIRE:

Table of Contents

4. Highlight each wireless adapter or wireless cradle you want to add,

and click Add.

To add all of the wireless clients listed in the Available Wireless Clients

column, click

Note: If the adapter or cradle does not appear in the Available

Wireless Clients column after 6 minutes, try these tips:

Check the ID numbers of the wireless adapters or cradles to see

which ones are not connecting.

Detach and reattach the wireless adapter or wireless cradle to the

Verify that the cradle is locked. (The lock on the back of the cradle

is in the ON position.)

5. When all of the adapters and cradles are added, click Finish.

Adding wireless adapters or cradles manually

When you add a wireless adapter or cradle manually, it immediately

appears in the TI-Nspire™ Network Manager window.

Manually Add Wireless Client(s)

The Add Wireless Clients by ID Number dialog box displays.

Wireless network

2. For each wireless adapter or cradle you are adding, identify the ID

number on the back of the adapter or cradle, and enter it in the

Wireless Client ID

Setting up the TI-Nspire™ Navigator™ Teacher Software

box. The ID is six digits.