Working With Connected Handhelds - Texas Instruments TINSPIRE Manual Book

– From the tool bar, click
Handhelds
– Click
The Transfer Tool opens.
3. Select the file, then click
The Status window opens and the Stop Transfer button is enabled.
The selected files and folders are transferred to the selected
handhelds.
4. When the transfer is complete, close the Transfer Tool.

Working with connected handhelds

You can use the Content workspace to perform a number of tasks. To use
the features described in this section, your handhelds must be turned on
and connected by one of these means:
• The TI-Nspire™ Docking Station or TI-Nspire™ CX Docking Station
• TI-Nspire™ Navigator™ Cradle
• TI-Nspire™ CX Wireless Network Adapter
• A direct connection through a standard USB cable
Note: The tasks in this section can only be performed by TI-Nspire™
handhelds. TI-84 handhelds are not supported in these tasks.
48 Using the Content Workspace
.
, then select
Send to Connected Handhelds
Start Transfer
, then select
Send to Connected
.
.