Battery Replacement; Security Alarm System - If Equipped - Dodge 2004 Durango Owner's Manual

Dodge 2004 durango suv owner's manual
Table of Contents

Advertisement

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Battery Replacement

The recommended replacement battery is CR2032.
1. If the key fob is equipped with a screw, remove the
screw. With the transmitter buttons facing down, use a
flat blade to pry the two halves of the transmitter apart.
Make sure not to damage the elastomer seal during
removal.
2. Remove and replace the batteries. Avoid touching the
new batteries with your fingers. Skin oils may cause
battery deterioration. If you touch a battery, clean it with
rubbing alcohol.
3. To assemble the transmitter case, snap the two halves
together.
NOTE: If the key fob is equipped with a screw, reinstall
and tighten the screw until snug.
SECURITY ALARM SYSTEM — IF EQUIPPED
This system monitors the vehicle doors, liftgate, and
ignition for unauthorized operation. When the alarm is
activated, the system provides both audible and visual
signals. The horn will sound repeatedly for 3 minutes
and the headlights and security light in the instrument
cluster will flash for an additional 15 minutes. The engine
will not run until the system is disarmed.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2004 hb durango

Table of Contents