I.link Related Messages - Pioneer Elite VSX-49TXi Operating Instructions Manual

i.LINK Related Messages

You may see the following messages displayed in the front panel display when using the i.LINK interface.
BUS FULL
The i.LINK bus has reached its capacity and cannot
transmit any more data.
CANNOT LINK 1
The interface between the receiver and the
selected i.LINK-equipped component is unstable.
If the i.LINK cables appear to be connected
properly and both the receiver and i.LINK-
equipped component are on, switch the receiver
and the component off and on again to reestablish
the interface between them.
CANNOT LINK 2
The receiver can't identify the selected i.LINK-
equipped component. For example, the receiver
may not be able to identify an i.LINK-equipped
personal computer.
LINK CHECK
The receiver is checking the i.LINK network. It does
this, for example, when components are added
or removed from the network. The sound may be
interrupted if this happens during playback.
LOOP CONNECT
The i.LINK network cannot function because it is
connected in a loop. Break the loop (see p.31).
NO NAME
NO NAME is displayed instead of an i.LINK-
equipped component name. The component has
no name.
NO SIGNAL
A component is outputting an i.LINK signal that
the receiver that cannot reproduce. This receiver
can reproduce signals from i.LINK-Audio-
equipped components (see p.30-31).
Techno Tidbits & Problem-solving
PQLS OFF
Displayed when PQLS turns off during playback.
The sound may be interrupted momentarily when
this happens.
PQLS ON
Displayed when PQLS turns on during playback.
The sound may be interrupted momentarily when
this happens.
UNKNOWN
UNKNOWN is displayed instead of an i.LINK-
equipped component name. The name of the
component isn't recognized.
This product complies with the following i.LINK
interface specifications:
1) IEEE Std 1394a-2000, Standard for a High
Performance Serial Bus
2) Audio and Music Data Transmission Protocol
2.0
Following the standard for AM824 sequence
adaptation layers, the product is compatible with
IEC60958 bitstream, DVD-A and SACD media.
111