Chapter 2: Getting to Know the
Wireless-G Game Adapter
The Wireless-G Game Adapter's Back Panel
The back panel is where you'll connect the Game
Adapter and find the Ad-hoc or Infrastructure
switch, as well as the Reset button.
Switch
The switch allows you to set the Game
Adapter to Ad-hoc or Infrastructure
mode.
Reset
The Reset button resets the Game
Adapter to its factory default settings.
Network
The Network port is where you will
connect the Ethernet network cable.
Power
The Power port is where you will con-
nect the power adapter.
2
Figure 2-1
The Wireless-G Game Adapter's LEDs
The Game Adapter's LEDs display the activity on
your network.
Green. The Power LED will light up
Power
when the Game Adapter is powered
on.
Ethernet
Green. The Ethernet LED will be lit
steadily when the Game Adapter is
connected to the wired network. The
LED will flash when there is wired
network traffic.
Wireless-G Green. The Wireless-G LED will be
lit steadily when the Game Adapter is
connected to the wireless network.
The LED will flash when there is
wireless network traffic.
Figure 2-2
3