Linksys WGA54G User Manual page 10

2. From the next screen, shown in Figure 5-11, select a radio button next to the
Advanced | Manual Configuration selection. Then, click Next.
3. The wireless set-
tings screen will
now appear, shown
in Figure 5-12.
Enter your wireless
network's SSID and
select the channel at
which the network
broadcasts its wire-
less signal. Then,
click Next to con-
tinue or Back to
return to the previ-
ous screen.
• SSID - The SSID is the unique name shared among all devices in your wire-
less network. The SSID must be identical for all devices in the wireless net-
work. It is case-sensitive and must not exceed 32 alphanumeric characters,
which can be any keyboard character.
• Channel - From the drop-down menu, select the appropriate channel to
match your network settings. All devices in your wireless network must use
the same channel in order to function correctly.
12
Figure 5-11
Figure 5-12
4. On the next screen, shown in Figure 5-13, enter the IP settings appropriate
for your network. Then, click Next to continue or Back to return to the pre-
vious screen.
• IP Address - This IP address must be unique to your network.
• IP Mask - The
Game Adapter's IP
Mask (also known
as Subnet Mask)
must be the same as
your wired net-
work's Subnet
Mask.
• Gateway - Enter the
IP address of your
network's Gateway.
5. Confirm your changes to the Game Adapter's settings on the following
screen, shown in Figure 5-14. Then, click Yes to accept these settings.
Figure 5-14
Figure 5-13
13