Linksys WGA54G User Manual page 12

• You can also enter the WEP key manually in the Key field. If you are using
64-bit WEP encryption, then the key must consist of exactly 10 hexadeci-
mal characters. If
you are using 128-
bit WEP encryp-
tion, then the key
must consist of
exactly 26 hexadec-
imal characters.
Valid hexadecimal
characters are "0"-
"9" and "A"-"F".
Then, click Next.
4. On the next screen, shown in Figure 5-19, enter the IP settings appropriate
for your network. Then, click Next to continue or Back to return to the pre-
vious screen.
• IP Address - This IP address must be unique to your network.
• IP Mask - The Game Adapter's IP Mask (also known as Subnet Mask)
must be the same as your wired network's Subnet Mask.
• Gateway - Enter the
IP address of your
network's Gateway.
16
Figure 5-18
Figure 5-19
5. Confirm your changes to the Game Adapter's settings on the following
screen, shown in Figure 5-20. Then, click Yes to accept these settings.
Figure 5-20
6. The following screen (shown in Figure 5-21) confirms that Advanced Setup
is complete. Later changes can be made from the Web-based Utility, as
shown in "Chapter 6: Using the Wireless-G Game Adapter's Web-based
Utility".
To register the Game Adapter, click Online Registration. To close the
Setup Wizard, click Exit.
Figure 5-21
17