Chapter 3: Getting To Know The Wireless-G Notebook Adapter - Linksys Instant Wireless Series User Manual

Chapter 3: Getting to Know the
Wireless-G Notebook Adapter
The Adapter's LEDs
Power Green. The Power LED lights up when the Adapter is pow-
ered on.
Link Green. The Link LED lights up and stays solid when the
Adapter is inserted correctly and a link is established with
the Notebook. The LED flashes when there is no signal.
4
Instant Wireless
Figure 3-1
® Series
Wireless-G Notebook Adapter
Chapter 4: Software Installation
and Configuration for Windows
98SE, Me, and 2000
Overview
The Wireless-G Notebook Adapter Setup Wizard will guide you through the
installation procedure for Windows 98SE, Me, and 2000. The Setup Wizard
will install the WLAN Monitor and driver, as well as configure the Adapter.
Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup
Wizard should run automatically, and Figure 4-1 should appear. If it does not,
click the Start button and choose Run. In the field that appears, enter
D:\setup.exe (if "D" is the letter of your CD-ROM drive).
Important for Windows XP users: Do NOT run the Setup Wizard.
Proceed directly to "Chapter 5: Hardware Installation."
Important for Windows 98SE, Me, and 2000 users: You must run
the Setup Wizard to install the software before installing the hardware.
Figure 4-1
5