Using The Wps Pin Method; Connecting The Wbpn Using A Pc - Cisco WBPN User Manual

Installing the WBPN Wireless-N Bridge for Phone Adapters

Connecting the WBPN Using a PC

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Connecting the WBPN Using a PC
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco WBPN User Guide

Using the WPS PIN Method

Connect the WBPN and power on all devices as previously described.
On the bottom of the WBPN unit, locate the label and make note of the PIN. The PIN
is a unique numeric code printed on the label.
Connect to your wireless device's web interface using a web browser. Your
computer must be connected to your wireless network.
In your router or device's WPS menu, enter the WBPN PIN into the field that allows
you to set up wireless devices using a PIN.
Save your changes. The device should automatically connect to the WBPN. After
the WBPN establishes a connection to the wireless device, the WPS LED displays
solid green, and the WLAN LED will display either solid green or flashing green,
depending on network activity.
Connect the IP phone power adapter to the WBPN power adapter port (labeled
#1 in the "WBPN Connections"
Connect the WBPN network cable (labeled #3 in the
graphic) to the Ethernet port on your PC.
Set your PC's IP address to a static IP address on the same subnet as the WBPN.
See Setting a Static IP Address on Your
Open your web browser and enter the default IP address for the WBPN:
192. 1 68. 1 .254.
Enter the default username (cisco) and password (cisco). You should change the
default username and password as soon as possible using the Setup Wizard or by
choosing Administration > Change Password in the management interface.
Follow the steps in the Setup Wizard to configure the WBPN. See the following
sections for more information.
graphic).
"WBPN Connections"
PC.
1
9