Discovering Available Wireless Networks - Cisco WBPN User Manual

Using the WBPN Wireless-N Bridge for Phone Adapters Configuration Utility
Configuring Wireless Parameters
STEP 1
STEP 2
STEP 3
Cisco WBPN User Guide
RF Output Power
Click Apply to save any changes.

Discovering Available Wireless Networks

To discover available wireless networks, from the Navigation Menu, choose
Wireless > Site Survey. A table displays the wireless networks that are
broadcasting, and contains the following information:
SSID
BSSID
Channel
Type
Encrypt
Signal
Click Refresh to repeat the survey.
Connecting to a Wireless Network
To connect to one of the wireless networks displayed in the Wireless Site Survey
table:
In the Select column, click the row of the network to which you want to connect.
Click Next.
Choose the type of encryption (normally, the WBPN detects the encryption and
you do not have to change this value).
Sets the strength of the wireless signal that the WBPN
transmits. If there are many wireless networks
broadcasting in or near the area where the WBPN is
physically located, you can lower the RF output power
to avoid overlap with other wireless networks and
reduce interference.
Wireless network name, or identifier, of the network.
MAC or hardware addresses of the network.
Channel on which the wireless network is broadcasting
and the 802. 1 1 network type.
Type of wireless network (for example, access point).
Security used on the wireless network.
Wireless signal strength of the network.
2
28