Installing The Wbpn Into The Spa Phone Stand - Cisco WBPN User Manual

Installing the WBPN Wireless-N Bridge for Phone Adapters

Installing the WBPN Into the SPA Phone Stand

STEP 4
STEP 5
STEP 6
STEP 7
Installing the WBPN Into the SPA Phone Stand
STEP 1
STEP 2
STEP 3
Cisco WBPN User Guide
Click on the TCP/IP tab.
Configure IPv4
Under
Enter an address in the range of 192. 1 68. 1 .2 to 192. 1 68. 1 .253; for example,
192. 1 68. 1 . 1 15. The subnet mask and router values do not need to be changed.
Click OK.
If the stand is attached to the phone, remove it.
Hold the stand with the Cisco logo facing you and the opening on the top.
Hold the WBPN so that the Cisco logo is facing you and the three LEDs are on the
top.
, choose Manually.
1
16