Cisco SRST - 881 EN Security Router Wireless Manual page 56

CISCO-SRST-MIB Object Groups
Table 1-6 SRST MIB Object Groups and Descriptions (continued)
MIB Group
csrstActiveStatsGroup
csrstMIBNotifsGroup
Cisco SRST SNMP MIB Release 3.4 Guide
1-42
MIB Object
csrstSipEndpointIpAddress
csrstSipEndpointDN
csrstSipVoRegNumberListTa
g
csrstState
csrstSipPhoneCurrentRegiste
red
csrstSipCallLegs
csrstTotalUpTime
csrstStateChange
csrstFailNotif
Max
Access Description
read-only This object indicates the SIP endpoint IP address
configured on this router. The type of IP address used
here is indicated by the csrstSipEndpointIpAddrType
object.
read-only This object indicates the SIP phone's DN or line
number assigned to the SIP endpoint.
read-only This object indicates the particular index of the
number list configured for the corresponding voice
register pool.
read-only This object indicates the current state of Cisco SRST
feature on this router.
Active - At least one IP or SIP phone is registered
Inactive - Cisco SRST has no IP or SIP phones
registered
read-only Total number of SIP phones currently registered to the
SRST router.
read-only Total number of SIP call legs routed through the SRST
router since going active. This includes incoming and
outgoing calls.
read-only Accumulated total number of minutes that router is
active in SRST mode.
notificatio An SRST up or down state change notification is
n generated. This indicates one or more phones is
registered to the SRST router or none is registered.
csrstSysNotifSeverity
csrstState
csrstSysNotifReason
notificatio A failure notification is generated when the SRST
n router encounters a catastrophic failure.
Chapter 1 Cisco SRST SNMP MIB Support
OL-7959-01