Cisco Voice Gateways; Cisco Ip Phones - Cisco SRST - 881 EN Security Router Wireless Manual

Chapter 1 Cisco SRST SNMP MIB Support
•
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/ffun_c/fcfprt3/fcf014.htm
•
•
•
Supported Platforms for SRST 3.4
The SRST 3.4 feature is supported on the platforms listed in the following sections.

Cisco Voice Gateways

The SRST 3.4 feature is supported on the following voice gateways:
•
•
•
•
•
•
•

Cisco IP Phones

The SRST 3.4 feature is supported on the following Cisco IP phones:
•
•
•
•
•
•
•
•
•
•
OL-7959-01
An SNMP manager must be available on the network. For more information on configuring an
SNMP server for use with a MIB, refer to the "Configuring SNMP Support" chapter of the Cisco
IOS Configuration Fundamentals and Network Management Configuration Guide, Release 12.3. at
the following URL:
An SNMP Agent must be configured for the router on which the CISCO-SRST-MIB feature is to be
used. Refer to the "Enabling the SNMP Agent"
Ensure the traps are defined in the NMS software.
Ensure the alarm events are not put into "log only" mode and come up as an Alarm.
Cisco IAD24xx
Cisco 17xx: 1751V and 1760
Cisco 2600XM: 261x XM, 262x XM, 265x XM, and 2691
Cisco 3600: 3640, 3640A, and 3660
Cisco 37xx: 3725 and 3745
Catalyst 4500 with AGM
Cisco 7200
Cisco IP Phone 7905 and 7905G
Cisco IP Phone 7910G
Cisco IP Phone 7902G
Cisco IP Phone 7912G
Cisco IP Expansion Module 7914
Cisco IP Conference Station 7935
Cisco IP Phone 7940 and 7940G
Cisco IP Phone 7960 and 7960G
Cisco VG248 Analog Phone Gateway Version 1.2(1) and higher
Cisco VG224 Analog phone gateway
section in this document for more information.
Cisco SRST SNMP MIB Release 3.4 Guide
Prerequisites
1-13