Cisco SRST - 881 EN Security Router Wireless Manual page 49

Chapter 1 Cisco SRST SNMP MIB Support
Table 1-6 SRST MIB Object Groups and Descriptions (continued)
MIB Group
OL-7959-01
MIB Object
csrstSipPhoneUnRegThresho
ld
csrstCallFwdNoAnswer
csrstCallFwdNoAnswerTo
csrstCallFwdBusy
csrstMohFilename
csrstMohMulticastAddrType read-only
csrstMohMulticastAddr
csrstMohMulticastPort
csrstVoiceMailNumber
csrstSystemMessagePrimary read-only
csrstSystemMessageSeconda
ry
Max
Access Description
read-write This object indicates a threshold for the number of SIP
phones unregistered to SRST. This threshold is
changeable by the NMS user.
read-only Cisco SRST call forwarding number when a Cisco IP
phone is not answered. This directory number is a fully
qualified E.164 number.
read-only Timeout in seconds if a Cisco IP phone is not
answered, Cisco SRST will call forward to another
directory number.
read-only Cisco SRST call forwarding number when a Cisco IP
phone is busy. This directory number is a fully
qualified E.164 number.
read-only Cisco SRST Music-On-Hold is enabled with file on
flash, or disabled without a file on flash. MOH is
enabled by default.
Internet address type governing the address type
format for one or more InetAddress objects in this
MIB. The associated InetAddress objects' description
will refer back to this type object as appropriate.
read-only This object indicates Cisco SRST Music-On-Hold
Multicast IP address. When configured, this feature
enables continuous IP multicast output of MOH from
a Flash MOH file. This object has no significance if
MOH is not configured. Default is the csrstIPAddress
object for Cisco SRST. The type of IP address used
here is indicated by the csrstMohMulticastAddrType
object.
read-only This object indicates Cisco SRST Music-On-Hold
Multicast TCP port which is range limited When
configured, this feature enables
read-only Cisco SRST voice mail number that is speed-dialed
when the messages button on a Cisco IP phone is
pressed. This voice mail number is a fully qualified
E.164 number. If voice-mail number is not configured,
this object will have a string length of 2 with the value
'**'.
Cisco SRST system static text message that is
displayed on Cisco IP phone during fallback. Length
of text string is less than 32 characters. Default
message is 'CM Fallback Service Operating'.
read-only Cisco SRST system message that is displayed on Cisco
IP phone that does not support static text message and
have a limited display space during fallback. Length of
text string is less than 20 characters. Default messages
is 'CM Fallback Service'.
Cisco SRST SNMP MIB Release 3.4 Guide
CISCO-SRST-MIB Object Groups
1-35