TP-Link TL-WR541G - Wireless Router User Manual page 28

for your ISP.
Service Name/AC Name - The service name and AC (Access Concentrator) name, these
should not be configured unless you are sure it is necessary for your ISP.
ISP Specified IP Address - If you know that your ISP does not automatically transmit your IP
address to the router during login, click "Use the IP Address specified by ISP" check box
and enter the IP Address in dotted-decimal notation, which your ISP provided.
Detect Online Interval - The default value is 0, you can input the value between 0 and 120.
The router will detect Access Concentrator online at every interval between seconds. If the
value is 0, it means, do not detect.
DNS IP address - If you know that your ISP does not automatically transmit DNS addresses
to the router during login, click "Use the following DNS servers" checkbox and enter the IP
address in dotted-decimal notation of your ISP's primary DNS server. If a secondary DNS
server address is available, enter it as well.
Click the Save button to save your settings.
4. If you choose 802.1X + Dynamic IP, you should enter the follow parameters(Figure 4-8) :
Figure 4-8 802.1X + Dynamic IP Settings
21