Command Line Options For Patch Creation; Command Line Options For Preflight Instrumentation; Command Line Options For Setupcapture Configuration - Symantec WISE PACKAGE STUDIO 8.0 - REFERENCE V1.0 Reference

Desired behavior
Validate the default project
vendor package.

Command Line Options for Patch Creation

Option
/a
Command Line Options for Preflight
Instrumentation
Desired behavior
Do not prompt for the file to act
upon. Instead, run the default
project file .MSI.
Command Line Options for SetupCapture
Configuration
Option
/r1
Wise Package Studio Reference
Example command line
path\wfwi.exe /g "[VendorPackage]"
The following table lists the command-line option you can use with wfwi.exe to run Patch
Creation.
See Patch Creation on page 128.
Results
Required option to run Patch Creation.
The executable that runs Preflight Instrumentation is PkgInst.exe. There are no options
for running the executable.
See Creating a Preflight Package
You can use variables to provide a file to act upon, as shown in the following table.
See Wise Package Studio Variables
Note
These examples are shown as they would be entered at the command prompt. When
you define a command-line option in Tool Setup, you do not need to include the .EXE in
the command line.
Example command line
path\PkgInst.exe "[ProjectDir]\[FileName].msi"
The following table lists the command-line option you can use with wfwi.exe to run
SetupCapture Configuration.
See SetupCapture Configuration
Results
Required option to run SetupCapture Configuration.
Wise Package Studio Command Line Options
on page 262.
on page 75.
on page 202.
280