Check Internet Connection; Check Network Location - Symantec WISE PACKAGE STUDIO 8.0 - REFERENCE V1.0 Reference

Wise Package Studio Reference
results. Standard tests are stored in the repository and are not available without a
repository, such as with the Standard Edition.
Requirements
Each standard test must be set up with relevant parameters. Because standard
tests are stored in the repository, they are shared among team members.
See also:

Check Internet Connection

Check Network Location

Database Connectivity on page 179
Execute Program on page 180
Check Internet Connection
Quality Assurance module only.
Use this test case to check internet connections to specific URLs. This test appears for
any package or group that you open, along with a default test item.
Requirements
The computer must have a valid Internet connection.
To set up and run the test case
1. Select the Check Internet Connection test case in the left pane of Test Expert.
2. Click Add.
The Check Internet Connection dialog box appears.
3. Configure the test item:
a. In URL, enter a complete Internet address. Example: http://
www.company.com.
b. Mark Make this a global test to have this test item appear for every package
or group that is subsequently opened in Test Expert. Otherwise it appears only
in the test plan of the currently opened package or group. Global tests are
stored in the repository and appear for all other users of the same repository.
c. Click OK to save the test item configuration.
d. Use the Edit button to change a test item configuration.
e. Use the Delete button to remove a test item.
4. To run the test item, select its check box and click Execute.
Check Network Location
Quality Assurance module only.
Use this test case to check if a specific network location is readable to the computer.
This test case appears for any package or group that you open, but it does not have any
test items until you add them.
on page 178
on page 178
Test Expert
178