Mower Deck Cut Height Lift Lever; Operation Instructions - Dixon ZTR 52 - 27 KOH, 60 - 27 KOH, 60 - 30 KOH, 72 - 27 KOH Operator's Manual

OPERATION INSTRUCTIONS

MOWER DECK CUT HEIGHT LIFT LEVER

The lifting lever is used to place the mower deck in the transport
position or one of the 18 different cutting heights.
The cutting height is set by placing a peg in the hole for the desired
cutting height and the peg is then locked on the inside with the
supplied pin.
1. To set the deck in the transport position, squeeze the underpin
upwards to the lift handle and pull
the lever backward to the locked
position (raised).
2. To set the deck for
mowing, select the desired
mowing height and place
the lock pin into the
matching hole. Secure on
the inside with hairpin
cotter. Squeeze the
underpin upwards to the lift
handle and push the lever
forward to the lock pin.
Release the lift handle.
3. The lift lever can also be
used to temporarily adjust the cutting
height, such as when passing a minor bump
in the lawn.
27