Parking Brake; Mower Deck Cut Height Lift Lever - Dixon ZTR GRIZZLY Safety Instructions & Operator's Manual

PARKING BRAKE:

The parking brake is designed to hold
the mower from moving and is not
intended for use in stopping the
mower while it is in motion. The
engine will stop if the parking brake is
engaged while the control levers are in
the drive position.
CAUTION
TO SET PARKING BRAKE:
The hand operated parking brake is located on the left
hand side of the mower.
•To engage brake, pull lever up (to the rear).
•To release brake, move lever forward (down).
Note: Always set parking brake before dismounting.
Release parking brake before moving mower.

MOWER DECK CUT HEIGHT LIFT LEVER:

•Located to the right and front of the operator.
•Controls the cutting height.
•Eight positions of adjustment
•Depress trigger and move lever forward to lower deck.
•Depress trigger and pull lever back to raise deck.
Note: Always use high position for transport.
CONTROLS
Engage parking brake
before starting engine.
20