Getting Started; Setting The Internet Access Parameters - Huawei HG532c Quick Start Manual

Home gateway

Hide thumbs Also See for HG532c:

2 Getting Started

Press down the ON/OFF button on the side of the HG532c to power on the

HG532c.

After you power on the HG532c, the Power indicators turns on and the

ADSL indicator blinks (for less than three minutes), which indicates that the

HG532c is being activated. After the ADSL indicator blinking, the Power

and ADSL indicators keep solid on, which indicates that the HG532c is

working properly.

To configure the HG532c, do as follows:

Step 1 Verify the HG532c and the PC have connected properly, and the PC

has obtained the IP address automatically.

Power off the HG532c if the embedded dial-up function is enabled but

the HG532c is not used for network access. Otherwise, even if you have

shut down your computer, the network operator may still charge you for

network access.

Step 2

1. Launch the Internet Explorer on the computer. Enter

http://192.168.1.1 in the address bar and press Enter.

2. In the displayed dialog box, enter the user name (admin by

default) and the password (admin by default), and then click Login.

After the password authentication is passed, you can access the

Web-based configuration utility.

Enable the embedded dial-up function.

Step 3

1. In the navigation tree on the left, choose Basic > WAN.

2. Click New to create a WAN connection.

3. Select DSL from the Link Type option button.

4. Select Enable for WAN connection.

5. Enter the VPI and VCI parameters that are provided by the

network operator in the VPI/VCI text boxes.

6. Select INTERNET from the Service list option button.

Table of Contents