Dixon Mountain Kodiak 18124-106 Safety And Operating Manual page 45

CARE AND MAINTENANCE
MOWER DECK LEVELING PROCEDURE
(continued):
D. Turn both outer blades to align with the deck in
front-to-rear manner. Turn left rear adjuster nut
up or down until rear of mower deck is
positioned level to 1/8" higher in the rear than the
side-to-side measurement. At this time, the
mower deck will be suspended on (3) points
(both front adjusters and the left rear adjuster).
Move the right rear adjuster and take out the
slack which will be present by turning adjuster
locknut up.
E. Confirm measurements once again. Blade tips
should be level in a side-to-side manner. In the
rear, blade tips should be level to 1/8" higher
than side-to-side measurement. In the front,
blade tips should be level to 1/8" lower than side-
to-side measurement.
NOTE: This will place the mower deck in a base
measurement position. Additional adjustment
may be required to achieve desired cut for the
type of grass or conditions being mowed.
45