Specifications - Dixon Black Bear 11249-106 Safety And Operating Manual

Dixon safety instructions and operator's manual
Table of Contents

Advertisement

SPECIFICATIONS

CHASSIS:
11 GA - rectangular tube
SEAT:
Designed for operator comfort by use of high-density
closed cell foam padded back and arm rests, upholstered
with Cordura
fore and aft.
MOWER DECK:
Made of 7 GA fabricated welded construction with external
reinforcement ribs. Two blades combine for a 34" cut
width. Cut height approximately 1.5" to 5.5" via 17 position
lift handle.
BLADE DRIVE:
Electric clutch
DRIVE SYSTEM:
Each rear wheel is independently driven by a Parker 10cc
pump and TE0230 wheel motor.
ENGINE:
Each mower is powered with either a 16HP Kawasaki, or
18HP Kohler engine, overhead valve, air cooled, gasoline,
full pressure lubrication with oil filter.
STARTING SYSTEM: Electric by key switch operation with safety interlocks on
parking brake and blade drive clutch.
TIRES:
Front 13 x 5 x 6 smooth tread (16-21 lbs)
Rear 23 X 8.5 X 12 Turf Master (8-14 lbs)
CAPACITIES:
Fuel - 4.5 gallon (approximately)
Hydrostat Oil tank - 4 quart with in-line 25 micron filter
Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS:
Width
Height
Length
Weight
Additional information may be provided elsewhere in this manual.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
BLACK BEAR™
water-repellent fabric. Seat is adjustable
TM
Kawasaki
35.5"
46"
71"
625 lbs.
17
Kohler
35.5"
46"
73"
625 lbs.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Black bear ztr

Table of Contents