7
OPERATING RADIO STEERING FUNCTION
a
a.
Check the radio steering functions. With the radio transmitter and receiver on, turn the steering wheel
/ stick to the left. The front tires/wheels should turn left accordingly. If not, flip the steering servo reverse
switch.
b.
Return the steering wheel / stick to neutral. The front tires/wheels should point straight forward. If not,
use the steering trim lever to correct it.
c.
Turn the steering wheel / stick to the right. The front tires/wheels should turn right accordingly.
OPERATING RADIO THROTTLE / BRAKE FUNCTION
8
a
a.
Check the radio throttle/brake functions. With the radio transmitter and receiver on, pull the trigger /
push the stick forward. The carburetor should be fully opened and the brake disengaged. To reverse
this function, flip the throttle/brake servo reverse switch.
b.
Return the trigger / stick to neutral. The carburetor should be closed to a point where the idle has
been set (see step 9 & 10 for settings), and the brake still disengaged. If not, use the throttle/brake
trim lever to correct it.
c.
Push the trigger / pull the stick backward. The carburetor opening should still be the same at neutral,
throttle spring compressed slightly, and the brake engaged.
b
b
c
c