Parking Brake - Dixon 2004 Operator's Manual

The Dixon ZEETER has a unique transaxle that requires only two drive
levers to control braking, turning, speed and direction.
On initial operation, set throttle speed on slow. Operate with mower
blade in "OFF" position.
To avoid "over-controlling" the mower, use a light touch on the drive
levers.
Slight movements using fingertip control is all that is necessary.

PARKING BRAKE:

The parking brake is designed to hold the mower
from moving and is not intended for use in stopping
the mower while it is in motion.
C A U T I O N
TO SET PARKING BRAKE:
The hand operated parking brake is located on the
right side of the mower.
To engage brake, pull lever up (to the rear).
To release brake, move lever forward (down).
NOTE:
18
CONTROLS
Engage parking brake before
starting engine.
Always set parking brake before
dismounting. Release parking brake
before moving mower.