Releasing The Handle; Offffloor/Carpet Switch - Kenmore 3911 - Upright Vacuum Use And Care Manual

RELEASING THE HANDLE
Release the handle by pressing down on
the handle release pedal with your foot and
pulling back and down on the handle with
your hand
Note: The agitator does not rotate when the
vacuum cleaner is in the upright position.
[
OFFtFLOORICARPET SWITCH
To start the vacuum cleaner, slide the
OFF/FLOORICARPET switch from the OFF
position to the FLOOR or CARPET position.
d CAUTION
Refer to your carpet manufacturers
cleaning recommendations. Some
imore delicate carpets may require that
they be vacuumed with the agitator
turned off, to prevent carpet damage.
To stop the vacuum cleaner, slide the
ON/FLOOR/CARPET switch to the OFF
position_
d CAUTUON
Do not allow vacuum cleaner to
remain in one spot for any length of
time when the agitator is turning,
Damage to carpet may occur.
OFF - turns both
suction and OFF!FLOOR/
CARPET
brush motors off.
Switch
FLOOR - turns
Selector
on the suction
motor only, In
this position the
brush assembly
does not
revolve, Use this setting for cleaning
hardwood and tile floors and when any
attachments (tools) are used.
CARPET - turns on both the suction and the
brush motors_
Note: The agitator does not rotate when the
vacuum cleaner is in the upright position
10