Table of Contents
Advertisement
Server controls, LEDs, and power
This section describes the controls and light-emitting diodes (LEDs) and how to turn
the server on and off.
Front view
The following illustration shows the controls, LEDs, and connectors on the front of
the server.
CD-ROM drive activity LED: When this LED is lit, it indicates that the CD-ROM
drive is in use.
CD-eject button: Press this button to release a CD from the CD-ROM drive.
Diskette-eject button: Press this button to release a diskette from the diskette
drive.
Hard disk drive activity LEDs: When these LEDs are flashing, it indicates that the
associated SCSI hard disk drive is in use.
Power LED: When this LED is lit, it indicates that ac and dc power are present in
the server. When this LED is flashing, it indicates that the server is in Standby
mode. When this LED is off, ac power is not present, or the power supply or the
LED itself has failed. A power LED is also on the rear of the server.
Note: If this LED is off, it does not mean that there is no electrical power in the
Power-control button: Press this button to turn the server on and off manually.
Reset button: Press this button to reset the server and run the power-on self-test
(POST). You might have to use a pen or the end of a straightened paper clip to
press the button.
Operator information panel: This panel contains controls and LEDs. For details,
see "Operator information panel" on page 8.
USB 2 connector: Connect a USB device to this connector.
USB 1 connector: Connect a USB device to this connector.
CD-eject button
CD-ROM drive
activity LED
Hard disk drive
Diskette drive
status LEDs
activity LED
USB 1 connector
USB 2 connector
server. The LED might be burned out. To remove all electrical power from
the server, you must disconnect the power cord from the electrical outlet.
Hard disk drive
Diskette-eject
activity LEDs
button
Operator
information
panel
Chapter 1. Introducing the xSeries 335 Type 8676 server
Power LED
Power control
button
Reset button
7
Advertisement
Table of Contents
