Network Controller; Supported Interfaces; Video; Service Improvement Features - Compaq ProLiant 8500 Setup And Installation Manual
Compaq proliant 8500 setup and installation guide
Hide thumbs
Also See for ProLiant 8500:
- Maintenance and service manual (191 pages) ,
- Upgrade manual (48 pages) ,
- Integration notes (27 pages)
Table of Contents
Advertisement
1-6 Compaq ProLiant 8500 Servers Setup and Installation Guide
Network Controller
Supported Interfaces
Video
Service Improvement Features
Supports a dual-port 10/100 TX UTP controller on the PCI local bus (on
some models). Features of the controller include two RJ-45 connectors
for 10BaseT or 100TX Ethernet. For information about the network
controller, refer to the Compaq Web Site at www.compaq.com.
Redundant Network Controller software, located on the Compaq
Support Software CD, supports a redundant NIC configuration. This
feature may be used with one dual-port, two dual-port, or two single-
port NICs.
NOTE: Remove the terminator plug from the second RJ-45 connector when using the
dual-port capabilities.
Wide Ultra2 SCSI (Very High Density Connector Interface connector)
Serial (two connectors)
Video
Parallel port
Keyboard
Mouse
Integrated PCI Video Controller provides maximum resolution of
1024 x 768 non-interlaced resolution with 2 MB memory
From 16 to more than 256 colors, depending on graphics mode
Supports SVGA, VGA, and EGA graphics resolution
Modular chassis
System Interconnect Status Indicators visible from exterior
Advertisement
Table of Contents
