IBM 7979B1U User Manual page 56

40
System x3650 Type 7979: User's Guide
6. Slide the expansion-slot cover out of the PCI low-profile expansion slot or PCI
riser-card assembly expansion slot.
7. Install the adapter. The following illustration shows how to install an adapter in
a PCI slot.
Note: For clarity, the riser-card assembly is shown inverted in the following
illustration.
Inverted riser assembly
8. If you removed the PCI riser-card assembly to install the adapter, align the
riser-card assembly with the release-tab posts, rear guides, and connector;
then, press the PCI riser-card assembly firmly into the connector (see
"Installing the riser-card assembly" on page 33).
Access holes
Release tabs