Completing The Setup - IBM 7979B1U User Manual

5. Select the software or firmware package that you want to install. On the next
6. Repeat step 5 until you have downloaded all the files that you need.
7. Follow the instructions in the Remote Supervisor Adapter II readme file that you
8. Restart the server after the software and firmware are installed.

Completing the setup

See the IBM Remote Supervisor Adapter II User's Guide on the IBM System x
Documentation CD for instructions for completing the configuration, including the
following procedures:
v Configuring the Ethernet ports
v Defining login IDs and passwords
v Selecting the events that will receive alert notifications
v Monitoring remote server status, using the Remote Supervisor Adapter II
v Controlling the server remotely
v Attaching a remote diskette drive, CD drive, or disk image to the server
After you configure the Remote Supervisor Adapter II Slimline, use the Web-based
interface to create a backup copy of the configuration so that you can restore the
configuration, if you have to replace the device. For more information, see the
Remote Supervisor Adapter II User's Guide.
page, click the link for each file that you want to download. Follow the
instructions that are displayed.
downloaded, to install the software and firmware.
SlimLine Web-based interface
Chapter 3. Configuring the server
113