Table of Contents
Advertisement
68
To remove a DIMM
Before you can install a new DIMM in a socket, first remove any
previously installed DIMM from that socket.
Important: Before removing any DIMM from the mainboard,
make sure to create a backup file of all important data.
1
Observe the ESD precautions and pre-installation procedures
described on page 35.
2
Locate the DIMM slots on the mainboard.
Important: Refer to DIMM population guidelines for important
information about requirements for removing DIMM modules.
3
Press the holding clips on both sides of the socket outward to
release the DIMM.
4
Gently pull the DIMM upward to remove it from the socket .
Note: Place your forefingers on the top of the DIMM before
pressing the holding clips to gently disengage the DIMM from the
socket.
3 System upgrade
Advertisement
Table of Contents
