Muratec OFFICEBRIDGE EXPANSION KIT (OB450) User Manual page 35

Searching for a destination
NOTE: In order to search an LDAP server, the server must be registered in advance.
Contact your system administrator. For more information on server set up, see
"LDAP Settings"
1
When the "Address Book" screen appears, click [Search].
2
Enter the search information.
Item
A Select the server that contains the destination. Usually, you do not need to
change the server. If you are not sure about it, ask your system adminis-
trator.
B • Name
• Fax
• E-mail
• Department
C • Any
• Initial
• Final
• Equal
• Not Use
D • AND
• OR
2-8 Using the OfficeBridge
on page 3-65.
Enter the name or part of a name to be searched.
Enter the fax number or a part of a fax number to be searched.
Enter part of the e-mail address to be searched.
This is not an independent field. To use this field either the Name, Fax
or e-mail should also be entered.
Searches any information in this field, including "blanks".
Searches for contacts that begin with the characters entered in this
field.
Searches for contacts that end with the characters entered in this field.
Searches for contacts that match exactly with the information entered
in this field.
Information in this field (including blanks) will not be used for searching
Searches for contacts that meet all the entered criteria.
Searches for contacts that meet any of the entered criteria.
A
B
C
D