Table of Contents
Advertisement
Management and Configuration
Admin
Note:
Accessing the Web
Pages
Note:
80
When in Admin mode, you have access to all the print server's parameters
and you can change them to your liking. This mode is intended for
network administrators and can be password protected to prevent
unauthorized changing of the print server parameters.
To protect the Admin pages from unauthorized use, it is highly recommended that you change
the default password.
This is done from the Admin | General Settings | General tab. Enter the password in the Root
Password field.
Follow the steps below to access the internal Web pages of the Axis
Network Print Server:
1. Enter the print server's IP address (or host name) in the Location/Address
field of your Web browser. Press Enter
2. The Printer Overview page will appear. Click Admin to access the
Administration Web pages.
3. If you have changed the User/Password combination, you will be prompted
for them. Click OK.
You can address the print server's Web interface via https:// To do this you must enable the
SSL/TLS protocols in the Web interface: Admin | Network Settings | Detailed View | TCP/IP
Network and set the HTTPS Enabled parameter to Yes (you must have a valid certificate
loaded). If you do not have a valid certificate loaded, select Admin | Security Settings |
HTTPS and click Create.
AXIS 5400+ / AXIS 5600+ User's Manual
Advertisement
Table of Contents
