Table of Contents
Advertisement
Introduction
Section 1
Introduction
About this Manual
Supported Environments
About Axis
6
Thank you for purchasing the AXIS 5400+/AXIS 5600+. This product has
been developed to connect your printers anywhere in your network,
allowing all network users access to shared printer resources.
This manual is applicable for the AXIS 5400+/AXIS 5600+ with firmware
version 7.10 or higher, providing introductory information as well as
detailed instructions on how to set up and manage the print server in
various network environments. It is intended for everyone involved in
installing and managing the print server. To fully benefit from this
manual, you should be familiar with basic networking principles.
These instructions are based on the settings in a new and unconfigured
print server. To reload the default parameters, you can perform a Factory
Default, which will restore most of the settings. See "Performing a Factory
Default" on page 122.
•
Windows
•
NetWare
•
Macintosh
•
UNIX/Linux
Axis increases the value of network solutions. The company is an
innovative market leader in network video and print servers. Axis'
products and solutions are focused on applications such as security
surveillance, remote monitoring and document management. The
products are based on in-house developed chip technology, which is also
sold to third parties.
Axis was founded in 1984 and is listed on the Nordic list, Mid Cap,
Information Technology. Axis operates globally with offices in 17
countries and in cooperation with distributors and system integrators in
70 countries. Markets outside Sweden account for more than 95% of
sales. Information about Axis can be found at www.axis.com
AXIS 5400+ / AXIS 5600+ User's Manual
Advertisement
Table of Contents
