Table of Contents
Advertisement
auto-immobilization sequence
1.
Turn ignition off or disarm alarm.
2.
After 30 seconds the systems Immobilization circuits activate
and engage the starter and ignition interrupt.
3.
LED blinks at ½ normal speeds.
Disarming auto-immobilization
To disarm auto-immobilization when active, follow any of the
sequences listed below.
Turn ignition on and press the arm/disarm button.
Arm the alarm and then disarm the alarm.
Turn the ignition on and enter the system valet/PIN code.
one-time valet feature
This feature allows the system to be put in valet mode only until the
next time the ignition is turned on.
ON: Valet mode will be exited every time the ignition is turned on.
OFF: Valet mode will only be exited by using the valet switch or
the remote control.
© 2 0 0 3 d i re c t e d e l e c t ro n i c s , i n c .
37
Advertisement
Table of Contents
