Maintaining Your Harmony 510; Upgrading Your Harmony 510 Firmware; Testing Your Remote Settings After A Software Upgrade; Upgrading To A New Harmony Remote - Logitech 915-000085 - Harmony 510 Advanced Universal Remote Control User Manual

Maintaining your Harmony 510

Upgrading your Harmony 510 firmware

Your Harmony 510 contains internal software, called firmware. The remote's firmware is similar to
your computer's operating system.
Logitech updates the firmware for your remote to ensure you're always getting the most from
your Harmony 510. Generally, when you connect your remote to your computer the Harmony
Remote Software updates your remote automatically if new firmware is available.
However, sometimes you may need to update the firmware manually.
To upgrade your Harmony 510 firmware:
1. Remove your Harmony from the charging station.
2. Connect your Harmony to your computer using the USB cable.
3. Start the Harmony Remote Software.
4. Click Downloads.
5. Click Firmware.
6. Follow the online instructions.

Testing your remote settings after a software upgrade

After you finish making any changes to your Harmony 510 configuration, you should test the
new set up to ensure everything is working the way you expect. This testing process is the same
as the one you did when you set up your Harmony 510 for the first time. For more detailed
information, see Testing your

Upgrading to a new Harmony remote

When you upgrade to a newer model Harmony, you can transfer the configuration from your
old remote to your new remote.
To upgrade to a new model Harmony remote:
From the Harmony Remote Software:
1. Click Remote Settings.
2. Click Manage Remotes.
3. Click Replace.
4. Follow the online instructions.
The Harmony one is always learning new tricks!
setup.
23