Naming A New Command Your Remote Learned - Logitech 915-000085 - Harmony 510 Advanced Universal Remote Control User Manual

Naming a new command your remote learned

When you teach your Harmony a new command, you need to give the command a name.
This way, you can refer to the command by name in various locations in the Harmony Remote
Software.
Logitech recommends you use the default names listed on the Learn IR page. By using the default
names, you minimize the chance of a button being assigned incorrectly on the Harmony 510.
Naming conventions Naming conventions
When naming a command for which there is no default name on the Learn IR page,
use the following naming conventions to make button assignment easier:
• • Don't use spaces or special characters such as /, & or * in the name. Don't use spaces or special characters such as /, & or * in the name.
• • Capitalize the start of words (for example, Capitalize the start of words (for example,
• • Start the command name with its main function (for example, Start the command name with its main function (for example,
VolumeRearDown, VolumeFrontUp). This helps group related commands in lists. VolumeRearDown, VolumeFrontUp
• • Start infrared commands that select inputs (for example, on a stereo receiver) with the Start infrared commands that select inputs (for example, on a stereo receiver) with the
prefix "Input". prefix "Input".
• • Don't name the input based on what you've connected to your device, rather name it Don't name the input based on what you've connected to your device, rather name it
based on what it's called on the front of the device, or on the remote control based on what it's called on the front of the device, or on the remote control
(for example, InputAux, InputVideo1, InputTape, InputDVD (for example, InputAux, InputVideo1, InputTape, InputDVD). ).
NextDisc, ModeDigital NextDisc, ModeDigital). ).
). This helps group related commands in lists.
VolumeRearUp, VolumeRearUp,