Connecting To Antennas - DirecTV HUGHES/ HTL-HD Owner's Manual

3-4. Connecting to Antennas - Round Dish (Satellite A)
Antenna
Cable TV
wall jack
Receiving Signals
1. Connect the "Antenna" to the "ANT IN" jack on the DIRECTV
2. Connect the cable TV signal to the "CABLE IN" jack on the DIRECTV HD Receiver using a coaxial RF cable.
3. Connect the "Jack 1" of the dish antenna to the "SATELLITE IN" jack on the DIRECTV HD Receiver using a
coaxial RF cable. (For proper dish installation, refer to the "Installer's Guide" provided with your
satellite dish antenna. Use RG6 type cable.)
4. Connect the "Phone Wall Jack" to "PHONE JACK" on the DIRECTV HD Receiver using a phone cable.
NOTE
While you are a subscriber to a DIRECTV
gram package, you can still view over-the-air
and cable TV programs, if you make connec-
tions to the over-the-air and/or cable jacks.
COMPONENT OUT
VIDEO OUT
(1080i i /720p/480p/480i i )
ANT IN
1 2
DIGITAL
AUDIO
S VIDEO
OUT
CABLE IN
OUT
L1 L2
OUT TO TV
R1 R2
OPTICAL
AUDIO OUT
pro-
®
DATA PORT
Y
RGB OUT DVI-HDTV OUT
Pb
TYPE
Pr
(1080i/720p/480p) (1080i/720p/480p) (1080i i /720p/480p/480i i )
Phone wall jack
HD Receiver using a coaxial RF cable.
®
NOTE
A triple LNB multi-satellite dish with a SAT
C LNB is required to receive all DIRECTV
High-Definition programming, along with
this DIRECTV HD Receiver.
LNB
Sat A
Dish
Jack 1
SATELLITE
PHONE IN
JACK
VCR
CONTROL
®
24