Display Formats - DirecTV HUGHES/ HTL-HD Owner's Manual

2. IMPORTANT OVERVIEW

2-3. Display Formats

The DIRECTV
FORMAT button repeatedly on the front panel changes the display formats following order:
1080i → 720p → 480p → 480i → native → variable 1 → variable 2 → variable 3 → DVI. In
1080i, 720p, 480p, and 480i modes, all input signal formats are converted to the chosen dis-
play format. In native, variable 1, variable 2, and variable 3 modes, the output display for-
mat is automatically adapted depending on input signal format, as follows.
Display Format modes
variable 1
variable 2
variable 3
In DVI mode, the output display format is automatically adapted based on the preferred reso-
lution format of the DVI-HDTV monitor. The format may be converted from the original broad-
cast format.
Note : The DVI mode is only available when a DVI-HDTV compatible monitor is connected to
the receiver.
Note : Only one of the YPbPr, RGB or DVI-HDTV jacks is available at any one time, depending
on the TYPE switch setting and DVI-HDTV connection status.
11
® HD Receiver provides several display formats. Pressing the DISPLAY
Input Signal format
1080i
720p
480p
480i
native
DVI
all formats
all formats
all formats
all formats
1080i
720p
480p
480i 480i(Component, DVI), 480p(RGB)
1080i
720p
480p/480i
1080i/720p
480p/480i
1080i/720p
480p/480i
all formats changes according to monitor type
Output Signal format
1080i
720p
480p
480i
1080i
720p
480p
1080i
720p
480p
1080i
480p
720p
480p