Adjusting System Settings; Set Output Channel; Input Key Enable/Disable; Select Menu Language - DirecTV HAH-SA Owner's Manual

Adjusting system
settings

Set output channel

Input key enable/disable

Select menu language

Caller ID enable/disable

Restore factory default
settings
Select the tab from the
System
described in this section. Use the
figure below) to change the appearance of the on-screen menus and select how
®
your DIRECTV Receiver operates with other devices. The
pane also allows you to:
• Set the receiver output channel to channel 3 or 4
• Enable or disable the
• Select English or Spanish language menus.
• Specify your time zone.
• Enable or disable daylight saving time
• Select full or short channel banner style
• Enable or disable Caller ID
Use the Output Channel menu button to toggle between channels 3 and 4,
whichever is unused in your area.
The Input Key menu button allows you to turn the remote control
on and off.
The Menu Language button allows you to display on-screen menus in English
(default) or Spanish.
Use the Caller ID menu button to turn the Caller ID feature on and off.
Incoming calls will not be displayed on-screen when the Caller ID feature is
disabled.
Note: You must subscribe to Caller ID service from your telephone company to
use this feature.
the Factory Defaults menu button to restore the
SELECT
options to the original factory settings.
, , and
Antenna Signal Test
to access the system functions
MAIN MENU
PREFERENCES
button on your remote control.
INPUT
functions are described Chapter 1 – Getting Started.
menu pane (shown in the
PREFERENCES
button
INPUT
PREFERENCES
31
Using the menus