Instructions: Tv Power, Volume, And Tv Input - DirecTV HR10-250 User Manual

Instructions
: TV Power, Volume, and TV Input
1. Go to the Remote Control Setup screen.
Press the DIRECTV button; then select Messages & Setup, then Settings, then Remote
Control. Choose which device/functions you want to control:
TV power, volume, and
To Control:
mute
Remote Control–TV
Choose:
(power, volume, mute)
2. Select the brand of your device.
Using the UP/DOWN arrows, highlight the brand of the device you wish to control,
then press SELECT. (If you have been using a universal TV remote control, select
your TV or A/V receiver's brand, not the brand of the universal remote.) Next you'll
see a screen with four-digit codes.
3. Prepare the remote control.
Point the remote away from your HD DVR. Refer to the table below and determine
which two buttons to press to prepare the remote. Press and hold the buttons
simultaneously for about 5 seconds (until the red light at the end of the remote control
lights up and stays on when you release the buttons).
TV power, volume,
To Control:
and mute
TV PWR and
Press the:
DIRECTV buttons
I n s t r u c t i o n s : T V P o w e r , V o l u m e , a n d T V I n p u t
TV input A/V receiver power,
volume, and mute
Remote Control– Remote Control–
TV (TV Input) A/V Stereo System
TV input A/V receiver power,
volume, and mute
TV Input and TV PWR and
DIRECTV buttons DIRECTV buttons
A/V receiver volume
and mute only
Remote Control–
A/V Stereo System
A/V receiver volume
and mute only
MUTE and
DIRECTV buttons
7
111