GE JCP67FWW - Profile 40" Electric Range Owner's Manual page 30

MODELS WITH FACTORY CONNECTED
POWER SUPPLY CORD
Some models may be equipped with a factory
connected 3 conductor power supply cord.
Mobile home installation or area where local
codes do not permit grounding through neutral,
a 4 conductor power supply cord kit rated at
125/250 volts minimum, 40 amps and
investigated for use with ranges shall be used.
Terminals on end of wires must be either closed
loop or open-end spade lugs with upturned ends.
30
INSTALLATION INSTRUCTIONS
(continued)
REMOVE COOKTOP SHIPPING SCREWS
The liftable cooktop is locked down to prevent
shipping damage.
1. Open both oven doors and locate the two
shipping screws at the front end, underneath
the cooktop.
2. Remove and discard the two shipping
screws. (Use a #2 Robertson or Phillips
head screwdriver.)