ScanSoft OMNIPAGE DIRECT 2 FOR WINDOWS Installation Manual page 13

A number appears in each zone indicating the order in which the
zone will be recognized. You may draw up to 99 separate zones.
2 Click on the Order zones tool (the # symbol) to change the order in
which the zones will be recognized.
The numbers in the zones will disappear.
To reorder the zones, click on the zone you want recognized first.
The number 1 will appear in the zone. Then click on the next zone
you want recognized; the number 2 will appear. Continue until
the zones are appropriately ordered.
3 Click on the Erase zones tool and then click on a zone selection
box.
The selection box will be erased – not the zone itself.
4 Click Recognize to start recognition.
During recognition, text blocks are painted gray and then black on the
screen as Direct works. The Recognize button turns into an Adjust button.
If, during recognition, you want to change the way you drew or ordered
zones, click Adjust. The Partial Page window will reappear and you can use
the tools again.
After recognition the text will appear in your application just as if you had
typed it yourself.
Step 5 Select Parts of a Page
How to Scan Text 11