On-The-Fly Editing - ScanSoft OMNIPAGE 15 Manual

Reading order can be displayed and changed. Click the Show
reading order tool in the Formatting toolbar to have the order
shown by arrows. Click again to remove the arrows.
Click the Change reading order tool for a set of reordering
buttons in place of the Formatting toolbar. A changed order is
applied in Plain Text and Formatted Text views. It modifies the
way the cursor moves through a page when it is exported
as True Page.

On-the-fly editing

This allows you to modify a recognized page through re-zoning, without
having to re-process the whole page. When on-the-fly editing is enabled,
zone changes (deleting, drawing, resizing, changing type) immediately
make changes in the recognized page. Conversely, when you modify
elements in the Text Editor's True Page view, this changes the zones on
that page.
Two linked tools on the Image toolbar control on-the-fly zoning. One of
these tools is always active whenever no recognition is in progress.
Click this to activate on-the-fly editing. The red signal shows
there are no stored zoning changes.
Click this to turn on-the-fly editing off. Your zoning changes are
stored; the on-the-fly tool displays a green signal to show there
are stored changes. To activate these changes, do one of the
following:
Click the on-the-fly tool with a green signal. The zoning changes
will cause changes in the Text Editor.
For details on how changes are handled in on-the-fly zoning and their
effects in the Text Editor views, see On-the-fly processing in online Help.
Chapter 4
54
Click the Perform OCR button to have the whole page
(re)recognized, including your zone changes.