HD Receiver with Standard Definition TV Monitor and VCR
Follow these steps indicated by the diagram on the next page.
1) Connect the satellite dish antenna and terrestrial antenna or cable service to the HD
receiver following the instructions in "HD Receiver and Satellite Dish Antenna with Ter-
restrial Antenna or Cable Service" on page 2–3.
2) Connect one set of standard Audio/Video cables (one yellow video connector, one white
left audio connector, and one red right audio connector) to the back of the HD receiver
using the connectors marked AUDIO L, R and VIDEO. Connect the other end of the
Audio and Video cables to the back of the TV monitor using the Audio/Video input con-
nectors.
Optional: For better performance, if your TV has an S-VIDEO input, then use an S-
Video cable instead of a standard yellow Video cable.
3) Connect another set of standard Audio/Video cables to the back of the HD receiver using
the connectors marked AUDIO L, R and VIDEO. Connect the other end of the audio
and video cables to the back of the VCR using the AUDIO/VIDEO input connectors.
Setting Up Your Satellite Receiver
Page 2-9