Table of Contents
Advertisement
The Menu System
Home Control
Home Control lets you remotely control several lamps and devices
through your receiver.
Home Control Setup
The Home Control Data Interface connects to the HOME CONTROL jack
on the back of the receiver. Once connected, you must tell the receiver
to use this port for Home Control.
1.
Press OK to bring up the Main menu.
2.
Point to and select Options.
3.
Point to and select System Options.
4.
Point to and select Data Port and choose Home Control as the
default setting.
Device Setup
1.
From the Main menu select Home Control.
Home Control can control several devices.
2.
Select a device you would like to control.
3.
Complete the on-screen sentence using the arrow buttons and OK.
Press OK to scroll through the lists of devices and locations.
46
To use the home control feature, you must
connect one end of the Home Control
Data Interface to a remote module
attached to the appliance you want to
control. The other end should connect to
the HOME CONTROL jack on the back of
the receiver via a coiled telephone
handset cord (available from most
retailers).
Home Control Jack on
the Back Panel
Home control modules are available as
accessories sold through your satellite
dealer or the accessories order form at the
back of this book.
Advertisement
Table of Contents
