Safety Information - RCA DRD222RD User Manual

Safety Information

WARNING
To reduce risk of fire or
shock hazard, do not
expose this receiver to
rain or moisture.
Cautions
Note to Cable TV Installer:
Note to Satellite Dish Installer:
IMPORTANT NOTICE:
Care and Cleaning:
Product Registration
Please fill out the product registration card and return it immediately. Returning the card allows us to contact you if needed.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model
numbers in case you need them. The numbers are located on the back of the player.
Model No. ____________________________________________________
Serial No. ____________________________________________________
Purchase Date: ________________________________________________
___________________________________________________________________________________
Dealer/Address/Phone:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
WARNING
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates
"dangerous voltage" inside the
product that presents a risk of
electric shock or personal injury.
Do not stack electronic components or other objects on top of the receiver.
The slots on top of the receiver must be left uncovered to allow proper airfow to the
unit. Blocking the airflow to the unit could impair performance or damage your
receiver and other components.
Do not stack the receiver on top of a "hot component" such as an audio power
amplifier.
FCC Regulations state that unauthorized changes or modifications to this equipment
may void the user's authority to operate it.
This reminder is provided to call your attention to Article 820-40 of the National
Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides
guidelines for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building as close to the point of
cable entry as practical.
This reminder is provided to call your attention to Article 810 and in particular
article 810-15 of the National Electrical Code which covers proper installation and
grounding of television receiving equipment as well as to article 820-40 of the
National Electrical Code which specifies that the satellite dish cable ground shall be
connected to the grounding system of the building as close to the point of cable
entry as practical.
This device incorporates an anticopy process technology that is protected by U.S.
patents and other intellectual property rights. The anticopy process is licensed for
non-commercial, home use only. Reverse engineering or disassembly is prohibited.
Use a soft cloth or the dusting attachment of your vacuum cleaner to dust your
receiver. Remove dust from the ventilation holes on the top and bottom.
Plastic surfaces are easily scratched and can be marred by alcohol and various
solvents. Avoid excessive use of oil-based furniture polishes since the materials used
in the cabinet will accumulate more dust. A non-abrasive, anti-static cleaner/polisher
is recommended.
This symbol indicates
important instructions
accompanying the product.