Table of Contents
Advertisement
2.1 HARDWARE INSTALLATION
This installer and driver can be used for any interface in the FireStudio Tube family line (FireStudio Mobile,
FireStudio Tube, FireStudio Lightpipe, FireStudio [26x26], FireStudio Project, and StudioLive 16.4.2). For
more information on the Universal Control application and multiple interface integration, please review Sections
3.1 and 4.1.
2.1.1 Installation in Microsoft Windows
After you insert the installation CD into your CD or DVD drive, the FireStudio Tube installer will take you
through each step of the installation process. Please read each message carefully, ensuring especially that you
do not connect your FireStudio Tube until the installer has finished and you have rebooted your computer.
The FireStudio Tube Installer was designed to be as simple and easy-to-follow as possible. Please read each
message carefully to ensure that the FireStudio Tube driver is properly installed.
Before continuing the FireStudio Tube Installation Setup, please close all applications and disconnect your
FireStudio Tube from your computer. If you see any Windows Security alerts, click "Install this driver
software anyway" (Vista) or "Continue anyway" (XP).
At the end of the installation, you will be prompted to reboot your computer to complete the installation.
Click "Finish" to automatically restart your PC. Once your computer has rebooted, connect the FireStudio
Tube. When the Found New Hardware wizard launches, follow the recommended steps. When the sync light
remains solid blue, your FireStudio Tube is synced to your computer and is ready to use!
2.1.2 Installation in Mac OS X
After inserting the installation CD into your disc drive, browse the disc and run the FireStudio Tube installer,
which will take you through each step of the installation process. Please read each message carefully,
ensuring especially that you do not connect your FireStudio Tube until the installer has finished and you have
rebooted your computer.
To begin installing the FireStudio Tube driver on your Mac, double click on the FireStudio Tube logo. The
FireStudio Tube installer requires that your user password be entered as a security measure. Once you have
entered your password, click "OK" to proceed with the rest of the installation.
When the Installer has finished, connect your FireStudio Tube to your computer with a FireWire cable. Once
the sync light is solid blue, your FireStudio Tube is ready to use.
GETTING STARTED
7 | PreSonus 2008
Advertisement
Table of Contents
